Abrasive removal system WodaGarnetClean

Plant for desludging the cutting basin

  • Without electricity (only compressed air)
  • Mobile, flexible and applicable for every machine type
  • incl. 3 filter fabric bags (1t each)
  • Full control through user-friendly, manual control

During water jet production, the sludge (sand/abrasive) is deposited in the cutting basin, so that it very often requires extensive cleaning. In addition, the water is contaminated with harmful substances - but legal standards prescribe what may be discharged into the sewerage system. With the products of our Woda-series we support you to meet legal and ecological requirements on the one hand and to save working time for cleaning the collecting basins on the other hand.

Abrasive removal with our desludging system: WodaGarnetClean

With the mobile manual system for manual removal of abrasive agent WodaGarnetClean you can remove abrasive sludge from any waterjet cutting system quickly and easily. The complete desludging system requires only compressed air (2-6 bar) and can be used variably where it is needed.

With the help of the suction lance, water is pumped into the deposited sand to stir up the hardened mass. The water-sand mixture is then sucked in and pumped into the collecting tank. Sand and coarse suspended particles are deposited in the suspended filter fabric bag (can be ordered from the dealer). The water can be pumped back into the water tank and the filled fabric bag can be removed with a forklift truck.
With WodaGarnetClean between 3 and 4 m³ of water per hour can be pumped and thus up to 1t of abrasive per hour can be filtered out. A container with e.g. 4x2m can be cleaned in about 3h.

Abrasive removal with our desludging system: WodaGarnetClean

During water jet production, the sludge (sand/abrasive) is deposited in the cutting basin, so that it very often requires extensive cleaning. In addition, the water is contaminated with harmful substances - but legal standards prescribe what may be discharged into the sewerage system. With the products of our Woda-series we support you to meet legal and ecological requirements on the one hand and to save working time for cleaning the collecting basins on the other hand.

Our solution for your problem: WodaGarnetClean our system for desludging

With the mobile manual system for manual removal of abrasive agent WodaGarnetClean you can remove abrasive sludge from any waterjet cutting system quickly and easily. The complete desludging system requires only compressed air (2-6 bar) and can be used variably where it is needed.

With the help of the suction lance, water is pumped into the deposited sand to stir up the hardened mass. The water-sand mixture is then sucked in and pumped into the collecting tank. Sand and coarse suspended particles are deposited in the suspended filter fabric bag (can be ordered from the dealer). The water can be pumped back into the water tank and the filled fabric bag can be removed with a forklift truck.
With WodaGarnetClean between 3 and 4 m³ of water per hour can be pumped and thus up to 1t of abrasive per hour can be filtered out. A container with e.g. 4x2m can be cleaned in about 3h.

Get in touch now

Note - You are welcome to call us: +49(0)721 46466226



en_USEnglish
Scroll to Top